GTA 40

The powerful EC engine and ¼” PM3 saw chain enables clean cutting and the variable chain speed allows full control of the cutting speed during use. The GTA 40 also has a sprocket cover with side-mounted chain tensioning and automatic chain lubrication, as well as a tool-free chain oil tank with sufficient volume for use with 6x AS 2 batteries.

A soft rubberised handle and upper grip helps prevent slipping during use. The claw-shaped deflector at the top of the tool separates the upper grip area from the cutting attachment. Please be aware that the GTA 40 has been designed for use with 2 hands. Can be used by both right and left-handed users thanks to the rocker on both sides of the tool. An attachment ring lets you hook the tool on a belt for easy access whether you are working in the air or on the ground.

A hardcase is included with the GTA 40 which can be used to transport the tool, with space included for up to 6x AS 2 batteries and an AL 5-2 high-speed charger.

The GTA 40 uses 2x AS 2 batteries which are discharged in parallel. The tool cannot be used with only one battery. The charge level indicator of the tool is located on the top of the tool in an easy-to-read position.   Using the supplied AL 5-2 high-speed charger, you can quickly recharge 2x AS 2 batteries simultaneously in 50 minutes.

Certified in accordance with IPX4 protection class means the GTA 40 and AS 2 batteries can be used in adverse weather conditions and is splashproof.

Included in the set:
•    2 x AS 2 Lithium-Ion, 28 Wh, 10.8 V
•    1 x AL 5-2 high-speed charger
•    1 x 15 cm / 6”  Light guide bar
•    1 x Picco Micro 3 (PM3) 1/4″ P, 1.1 mm, 38 drive links, 15 cm / 6″ saw chain
•    1 x Hardcase
•    1 x Attachment ring